8 Way AirPod Case Not Charging | Do it Something.

Airpod Case Not Charging

Did you know about Airpod Case Not Charging, if yes then this article is for you. We will be discussing Airpod Case Not Charging. Read on for more.

Check the charging cable: Make sure that the charging cable is properly plugged in and that the USB end is plugged into a power source. If the cable is damaged, try using a different cable.

Check the charging port: Make sure that the charging port on the AirPods case is clean and free of debris. You can use a soft-bristled brush or a toothbrush to gently clean the charging port.

Restart the AirPods: Try restarting the AirPods by placing them in the case and leaving them for at least 15 minutes. Then, take them out and try charging the case again.

Check the battery: If the AirPods case battery is completely drained, it may take up to 20 minutes for the charging indicator to appear. If the battery is still not charging after that, you may need to replace it.

Reset the AirPods: If none of the above steps work, try resetting the AirPods by pressing and holding the button on the back of the case for at least 15 seconds until the LED light flashes amber.

If none of these steps work, you may need to contact Apple Support for further assistance or consider replacing the AirPods case.

How to Repair an Uncharging AirPod Case?

If your Airgoods case is not charging even after trying the basic troubleshooting steps, you may need to repair it. Here are the steps you can follow to repair an unchanging AirPod case: Also, read about, Which Is Better ThinkPad Vs IdeaPad.

1. Verify warranty: If your AirPods case is under warranty, you should contact Apple Support and get it repaired or replaced. You can check the warranty status by visiting the Apple Support website and entering the serial number of your AirPods.
2. Clean the charging contacts: Use a soft, dry, lint-free cloth to clean the charging contacts on the bottom of the AirPods case and the inside of the charging case.
3. Check the charging cable: Make sure that the charging cable is not damaged and is properly plugged into a power source.
4. Try a different power source: Plug the charging cable into a different power source, such as a different USB port on your computer or a wall charger.
5. Reset the AirPods: Reset your AirPods by pressing and holding the setup button on the back of the case for at least 15 seconds until the LED light flashes amber.
6. Update the firmware: Check for any available firmware updates for your AirPods and update them if necessary.
7. Replace the battery: If the above steps don’t work, you may need to replace the battery. You can take your AirPods case to an authorized Apple service center to get the battery replaced.

If none of the above steps work, you may need to contact Apple Support for further assistance or consider purchasing a new AirPods case

Change Your Cable

The internal wires are probably broken if the rubber wrapping has tears or the cables are severely twisted. When this occurs, the current won’t flow through them, preventing the charging of your AirPod case.

Connect this cord to a different AirPod or phone and check to see if that device is charging to determine whether the problem is with the cable.

You might try charging your phone with a different lightning cord as well. If you’re intending to purchase a new cable because you don’t have a spare, be sure it has the MFi badge and is Apple-certified.

Your AirPods may become even more damaged if you use accessories from other parties.

Charger Pad Check

If you use a charging pad to wirelessly charge your AirPod, be sure to properly position the AirPod case in the center of the pad. Check to see if the pad is intact.

Any indication of tears or protruding wires can result in a defect that will prevent your AirPod case from charging.

Make sure the wireless charger is connected to the power socket correctly as well. Your case won’t charge from a weakly connected pad. To test whether the pad is functioning properly, try charging additional devices on it.

Check to see if the wireless battery charger has enough power to recharge your AirPod case. It cannot charge your case if it is dead.

AirPod Case Pin, clean

There is a pin on the AirPod case’s contact base. This pin is susceptible to corroding if it is exposed to moisture or dust. Your AirPods may not be able to connect to the magnetic base of the case due to this layer of rust and dust.

The AirPod case pins are the charging contacts located on the bottom of the case that make contact with the charging cable to charge the AirPods. If these pins are dirty or obstructed, it can prevent the case from charging properly. Here are the steps to clean the AirPod case pins:

Turn off the AirPods and remove them from the case.

Use a soft-bristled brush, such as a toothbrush, to gently clean the pins and remove any debris or dirt that may be obstructing them.

Alternatively, you can use a soft, lint-free cloth to wipe the pins clean. Make sure that the pins are completely dry before attempting to charge the AirPod case.

Once the pins are clean and dry, place the AirPods back into the case and connect the charging cable to ensure that the case is charging properly.

It’s important to be gentle while cleaning the pins, as they can be easily damaged if too much pressure is applied. Avoid using any liquids or abrasive materials to clean the pins, as this can also cause damage.

Clean up the AirPods

All the features of your AirPods will return to their original settings when you reset them. If your AirPod case isn’t charging, resetting them can help. To reset it, make sure you’ve connected it to your iCloud account.

Follow the instructions below while keeping both of your AirPods in the case.

Here are the steps to clean AirPods:

1. Remove the AirPods from their case and turn them off.
2. Use a dry, soft-bristled brush to gently remove any debris or dirt from the speaker grilles, microphone, and charging ports.
3. Dampen a soft, lint-free cloth with water and gently wipe down the exterior of the AirPods and charging case. Avoid getting moisture inside the speaker grilles or charging ports.
4. For stubborn grime or dirt, use a small amount of rubbing alcohol on a cloth and gently clean the affected area.
5. For the ear tips, remove them from the AirPods and rinse them in water. Dry them with a clean cloth and reattach them to the AirPods.
6. Let the AirPods and charging case air dry completely before placing them back in the case and using them again.

It’s important to clean your AirPods regularly to ensure they work properly and to prevent any potential damage.

The Apple Customer Support number

Contact Apple customer care if none of the aforementioned options work for you. It is sometimes wise to leave things to experts.

The Apple Customer Support number varies depending on your location. Here are some of the most commonly used Apple support numbers:

• United States: 1-800-275-2273
• Canada (English): 1-800-263-3394
• Canada (French): 1-800-263-3394
• United Kingdom: 0800 107 6285
• Australia: 1300 321 456
• New Zealand: 0800 1 27753

If your country is not listed here, you can visit Apple’s website and select your country or region to find the appropriate support number. You can also contact Apple support through their website or by visiting an Apple Store in person.

Also read about Top 7 Laptops With The Best Speakers.

FAQ <> Airpod Case Not Charging?

Conclusion

This was our guide – Airpod Case Not Charging

If an AirPod is faulty (water damaged, dropped from a height, or the battery has died), you may not be able to charge the case. 1.

Re-Plug the Case into the Charger If the charging cable does not make a proper connection to both ends (i.e., charger and case), the case may fail to charge.

This article should have helped you understand why one Airpod Case Not Charging. Please let us know in the comments area if you have any questions.